en:settings_dentalscanners
This is an old revision of the document!
System Options - Tab |Interfaces| - Desktop scanners|IOS
In principle, OnyxCeph³™ can import scans from any model or intraoral scanner, provided that the prerequisites defined for further processing with regard to file format, data set size, mesh topology and bite relation are met.
If the scanner cannot be called or queried via one of the predefined interfaces, the "Simple Image Import Interface should be set up and used for patient-related import.
For the scanners listed below, default settings for scan import can be defined in the system options. The list will be expanded regularly as required.
Interface | System / Software |
---|---|
CS_3X00 | Carestream IOS |
CADstar | CADstar Desktopscanner |
DentalDirect | Dental Direct Desktopscanner |
Imetric | Imetric Desktopscanner |
CERECortho | Omnicam IOS |
SHINING 3D | Shinging Desktopscanner / IOS |
DOF | DOF Desktopscanner |
iTero | iTero Download Import |
smart optics | smartoptics Desktopscanner |
orthoX | orthoX Desktopscanner |
R+K | R+K Desktopscanner |
ZirkonZahn | Zirkonzahn ZZ 300, ZZ 600 Desktopscanner |
True Definition | 3M IOS |
en/settings_dentalscanners.1611920262.txt.gz · Last modified: 2021/01/29 12:37 by onyxadmin