en:bondingtrays_3d_examples
Modul Bonding Trays 3D - Examples
Parameters of Bracket Clamps "Sleeve"
Parameter | Description | Min | Max | Standard | |
---|---|---|---|---|---|
A | Overlap Slot | Height of the clamp over the slot in direction occlusal or along the bracket | -2.0mm | 5,0mm | 0.5 mm |
B | Rotation | Alignment of the bracket box acc. to the bracket geometry (0 % means a common direction for all brackets, best for taking of the tray, 100 % means most individual fit to bracket without common direction for all) | 0% | 100% | 100% |
C | Distance to Bracket | Additional offset to the bracket, 0.1 mm is more loose, -0.1 a too tight fit | -0.10mm | 0.10mm | 0.0 mm |
D | Thickness | Relative thickness of the clamp, has not effect on the fit around the bracket | 50% | 300% | 100 % |
E | Height Cap | Height of optional cap from buccal side | 0,00mm | 6.00mm | 0.00mm |
F | Width | Width relative to bracket for thinner hull | 30% | 110% | 110% |
Slot Pin-Lenght | Length of lateral slot fixation | 0,00mm | 1.00mm | 0.00mm |
Parameters of Bracket Clamps "Kylix"
Parameter | Description | Standard |
---|---|---|
Thickness of base ring | Thickness of the frame below the bracket base, use 0 mm to disable this inner frame | 0.0 mm |
Thickness of kylix ring | Thickness of the frame around the bracket base, contour can be designed for selected bracket(s) | 0.5 mm |
Parameters of Tray
Parameter | Description | Standard |
---|---|---|
Distance to crown | Perpendicular Distance of the tray to the crown surface (i.e. in all directions) | 0.05 mm |
Thickness | Thickness of the tray | 0.60 mm |
Block out | Strength of blocking while constructing the tray, features smaller than the chosen size are reduced | 0.00 mm |
Contact Surface | Create a planar surface using different criteria for easier printing | none |
Precision | Resolution of the tray geometry, has no influence on the fit of the brackets | 50 % |
Examples for Bracket Clamp Design
Examples for Tray Design
en/bondingtrays_3d_examples.txt · Last modified: 2021/02/23 07:23 by onyxadmin